Aluflam AF91 glass fire doors are high performance, thermally broken narrow aluminium frames with its cavity filled with patented fire retardant cooling core. Incorporating extensively tested fire resistant glazing, the AF91 single door system can be used internally or externally in either 60, 90 or 120 minute fire ratings. Aluflam glass structures are extensively tested in Australia and throughout the world to the highest standards for fire resistance.
- Clean, sharp lines of narrow stile aluminium
- Large glass areas
- Easily integrated into large shopfront, glass partition
or curtain wall
- Can be install in masonry or plasterboard fire wall
- Simple installation
- High impact resistance
- Energy efficient
- Incorporates high quality commercial door hardware
- Interior and exterior installation
- Fire rating up to -/120/90
The revolutionary aluminium framing is a thermally broken 61.5x91mm high quality extruded profile that is filled with a patented insulating compound. The door is sold as a complete system including the door leaf and the door frame. All gaps and edges are sealed with high temperature gaskets for fire, smoke and weather protection.
|Fire rating||Not rated||EW120 EI30||EW120 EI30||-/120/90||EI60||EI60||EI90|
|Glass||Any single or IGU||Contraflam Lite 120||Contraflam Lite 60 ClimaPlus||Contraflam 90||Pyrostop 60-101||Pyrostop 60-201||Pyrostop 90-200|
|Glass thickness||6 – 44mm||14mm||32mm||40mm||23mm||27mm||47mm|
|Max size (w x h)||1,500 x 3,000mm||1,400 x 2,600mm||1,400 x 2,600mm||1,200 x 2,500mm||1,200 x 2,500mm||1,200 x 2,500mm||1,200 x 2,500mm|
|Max area (m2)||-||3.28||3.28||2.40||3.01||3.01||3.01|
|Sound reduction Rw||–||38 (-1, -2) dB||38 (-2, -5) dB||46 (-2, -3) dB||41 (0, -3) dB||41 (0, -3) dB||42 (-1, -4) dB|
|U value W/m³K||–||5.0||1.5||3.6||4.7||4.6||2.7|
|Glass weight||–||31.0 kg/m²||46.0 kg/m²||82.0 kg/m²||54.0 kg/m²||60.0 kg/m²||96.0 kg/m²|
A grade safety glass to AS1288 is used in all Aluflam glass structures. Multiple layers of specially toughened safety glass is laminated with intumescent gel that provides thermal protection. For exterior installations a double glazed unit with 6mm toughed low-E glass is used to provide higher comfort levels and also protection of the intumecent gels from elevated temperatures. Refer to our Glass page for details.
Aluflam can supply a number of factory applied finishes including.
- Polyester power coating Refer to our Metal Finishes page for details.
Sidelites and Transoms
The Aluflam AF70 doors integrates perfectly with the AF70 Glass Partition and AF70 Shop Front framing systems. For 2 hour systems the AF70 doors integrates with the AW60 Curtain Wall or AW60 Glass Partition framing.
As a fire door it must be inspected annually in accordance with AS1851 by a competent person checking the operation, tolerances, integrity of the glass and seals. Full details are in the standard
Standard Door and Frame
The standard door frame size that is offered is 1,038mm wide x 2,102mm high. The door within this frame will be 950mm wide x 2,050mm high. This provides a DDA compliant clear opening of 862mm. When installing in the wall, the opening needs to be 20-30mm wider and 10-20mm higher than the door frame. The gap between the door frame and the masonry is to be fire stopped with mineral wool (100kg/m³) and silicone sealant.
|Closer||dorma TS93 series|
|Hinges||Dr Hahn Turband 4|
|Mortice lock||dormakaba SB2312|
|Furniture||dorma Noosa 6506 narrow stile|
In addition to the standard hardware Aluflam can provide alternatives such as concealed closers, cylindrical hinges, alternative levers etc. Contact a sales representative to enquire. Some common additional hardware items are.
|Electric strike||Lockwood ES200|
|Automatic threshold closer||Planet MF|